Home > Products > Kollmorgen > Kollmorgen servo drives

Kollmorgen servo drives

Kollmorgen servo drives

Kollmorgen servo drives are utilized by machines to offer motion control in dynamic applications. Kollmorgen servo drives are commonly paired with our broad lineup of Kollmorgen servomotors but are suited to run with most servomotors on the market due to flexible setup software and the most popular feedback support on the market (including resolvers, incremental encoders, BiSS, EnDat, Hiperface, sine encoders). Kollmorgen servo drives even support ac induction motors and dc motors in certain varieties for the ultimate in a platform servo drive functionality.
Kollmorgen servo drives are used for dynamic motion applications where precise positioning, speed control, or torque efficiency is key. Kollmorgen servo drives range from 300 watts to 50,000 watts of continuous duty power output. Peak outputs Kollmorgen servo drives are impressive with peak operation at 3 times the rated continuous current for a full 5 seconds in certain drives. This is a clear Kollmorgen advantage since many manufacturers can only rate peak operation at 1 second or less. This allows many applications to use significantly smaller servo drives and expands the dynamic performance of the servo drive lineup.
Kollmorgen servo drives are designed to provide precise control, optimum torque and a rich feature set to complement our wide range of our rotary servomotors and linear positioning systems. We offer the broadest connectivity with the most advanced control technology, simplest commissioning and most compact packaging available in the global marketplace.

kollmorgen CD Series Servo Drive Cx10
kollmorgen CD Series Servo Drive Cx10
The CD Series operates directly from single- or three-phase 110 to 240 VAC input and provides continuous output current of 3, 6, 10 and 20 Amps RMS. These high-performance digital servo drives support current, velocity or position mode, and offer numerous position control options. AC input voltages
kollmorgen CD Series Servo Drive Cx06
kollmorgen CD Series Servo Drive Cx06
The CD Series operates directly from single- or three-phase 110 to 240 VAC input and provides continuous output current of 3, 6, 10 and 20 Amps RMS. These high-performance digital servo drives support current, velocity or position mode, and offer numerous position control options. AC input voltages
kollmorgen CD Series Servo Drive Cx03
kollmorgen CD Series Servo Drive Cx03
The CD Series operates directly from single- or three-phase 110 to 240 VAC input and provides continuous output current of 3, 6, 10 and 20 Amps RMS. These high-performance digital servo drives support current, velocity or position mode, and offer numerous position control options. AC input voltages
kollmorgen S600 digital Servo Drive
kollmorgen S600 digital Servo Drive
The S600 Series of digital servo drives operates directly from 230 to 480 VAC lines and provides output current of1.5 to 70 Amps RMS/phase, continuous. Intelligent positioning capabilities include speed profiles, register control, jolt limiting, daisy-chained tasks, absolute and relative tasks, and
Kollmorgen S400 Servo Drives 406-A
Kollmorgen S400 Servo Drives 406-A
This digital multi-axis system operates directly from 115 to 400 VAC lines and provides output current of 3 or 6 Amps RMS/phase, continuous. It supports 1 master and up to 7 extension axes, is CANopen compatible, and is fully programmable via an RS232 interface.Two current classes: 3A and 6A rated c
Kollmorgen S400 Servo Drives 403-A
Kollmorgen S400 Servo Drives 403-A
This digital multi-axis system operates directly from 115 to 400 VAC lines and provides output current of 3 or 6 Amps RMS/phase, continuous. It supports 1 master and up to 7 extension axes, is CANopen compatible, and is fully programmable via an RS232 interface.Two current classes: 3A and 6A rated c
Kollmorgen S400 Servo Drives 446-M
Kollmorgen S400 Servo Drives 446-M
This digital multi-axis system operates directly from 115 to 400 VAC lines and provides output current of 3 or 6 Amps RMS/phase, continuous. It supports 1 master and up to 7 extension axes, is CANopen compatible, and is fully programmable via an RS232 interface.Two current classes: 3A and 6A rated c
Kollmorgen S400 Servo Drives 443-M
Kollmorgen S400 Servo Drives 443-M
This digital multi-axis system operates directly from 115 to 400 VAC lines and provides output current of 3 or 6 Amps RMS/phase, continuous. It supports 1 master and up to 7 extension axes, is CANopen compatible, and is fully programmable via an RS232 interface.Two current classes: 3A and 6A rated c
Kollmorgen S400 Servo Drives 406-A
Kollmorgen S400 Servo Drives 406-A
This digital multi-axis system operates directly from 115 to 400 VAC lines and provides output current of 3 or 6 Amps RMS/phase, continuous. It supports 1 master and up to 7 extension axes, is CANopen compatible, and is fully programmable via an RS232 interface.Two current classes: 3A and 6A rated c
Kollmorgen S400 Servo Drives 403-A
Kollmorgen S400 Servo Drives 403-A
This digital multi-axis system operates directly from 115 to 400 VAC lines and provides output current of 3 or 6 Amps RMS/phase, continuous. It supports 1 master and up to 7 extension axes, is CANopen compatible, and is fully programmable via an RS232 interface.Two current classes: 3A and 6A rated c
Kollmorgen servo drives
Kollmorgen servo drives

Kollmorgen servo drives are utilized by machines to offer motion control in dynamic applications. Kollmorgen servo drives are commonly paired with our broad lineup of Kollmorgen servomotors but are suited to run with most servomotors on the market due to flexible setup software and the most popular feedback support on the market (including resolvers, incremental encoders, BiSS, EnDat, Hiperface, sine encoders). Kollmorgen servo drives even support ac induction motors and dc motors in certain varieties for the ultimate in a platform servo drive functionality. Kollmorgen servo drives are used for dynamic motion applications where precise positioning, speed control, or torque efficiency is key. Kollmorgen servo drives range from 300 watts to 50,000 watts of continuous duty power output. Peak outputs Kollmorgen servo drives are impressive with peak operation at 3 times the rated continuous current for a full 5 seconds in certain drives. This is a clear Kollmorgen advantage since many manufacturers can only rate peak operation at 1 second or less. This allows many applications to use significantly smaller servo drives and expands the dynamic performance of the servo drive lineup. Kollmorgen servo drives are designed to provide precise control, optimum torque and a rich feature set to complement our wide range of our rotary servomotors and linear positioning systems. We offer the broadest connectivity with the most advanced control technology, simplest commissioning and most compact packaging available in the global marketplace.

Hot Products
Contact Us
  • A&S Servo Motor Co., Ltd
  • No.469 Xinsheng Road, Gaoxin District, Chengdu, China
  • Tel:+86-28​-65891784
    Cell/Wsap.: +86-13348956269
  • Fax: +86-28-86129221
  • Email: servomotor@electrical8.com
  • Contact Person: Praita
News & Events
Online Ordering

Shop Now at Our Online Store

Hot Products
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code