Home > Products > SEW > SEW servo speed reducer

SEW servo speed reducer

SEW servo speed reducer

SEW Helical servo gearmotors
SEW Helical servo gearmotors
The variety of sizes allows almost all requirements to be met. For high output speeds, the RX57 to RX107 series of single-stage gear units offers compact, space-saving solutions. And applications where weight is an issue will benefit from our multi-stage gear units: Thanks to their die-cast aluminum
SEW Helical-bevel servo gearmotors
SEW Helical-bevel servo gearmotors
Helical-bevel gear units from SEW-EURODRIVE provide a high degree of efficiency of over 95% in both torque directions and at all input speeds – performance designed to last. High-endurance gearing enables high-torque, wear-free operation long into the future. The remarkably high efficiency of
SEW Helical-worm servo gearmotors
SEW Helical-worm servo gearmotors
The standard gear units of the 7 Series incorporate power and variety. The synchronous and asynchronous servomotors are characterized by precision, dynamic and torque in a compact design. The combination of these gear units and motors sets standards worldwide. SEW-EURODRIVE’s modular concept,
SEW SPIROPLAN® servo gearmotors
SEW SPIROPLAN® servo gearmotors
SPIROPLAN® servo gearmotors with directly installed CMP synchronous servomotors are extremely efficient, quiet and, with a wide variety of different designs, offer the customer the greatest possible flexibility. The W37/W47 Spiroplan right-angle gear units enable high speeds at even the smallest
SEW BSF series Helical-bevel servo gear units
SEW BSF series Helical-bevel servo gear units
The low backlash BSF helical-bevel servo gear units are designed for the 40 to 1500 Nm (350 to 13200 lb-in) torque classes. The permitted acceleration torques are significantly higher than these values.These right-angle servo gear units are available in five output versions:BSF: Solid shaftBSKF: Sol
SEW PSF series Planetary servo gear units
SEW PSF series Planetary servo gear units
The low backlash PSF planetary servo gear units are designed for the 25 to 3000 Nm (220 to 26500 lb-in) torque classes. The permitted acceleration torques are significantly higher than these values.Three output versions are available:PSF: Solid shaftPSKF: Solid shaft with keyPSBF: Flange block shaft
SEW PSC series Planetary servo gear units
SEW PSC series Planetary servo gear units
The low backlash PSC planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible flexibility and cost-efficiency because not every application requires high-performance components.They provide a basis for divers
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code