Schneider-electric BMH servo motor BMH1001T07F2A

PRODUCT DETILS 

Characteristics
Main
Commercial Status Commercialised
Product or component type Servo motor
Device short name BMH
Maximum mechanical speed 6000
Continuous stall torque 30.09 lbf.in (3.4 N.m) for LXM32.D18M2 6 A at 230 V single phase
30.09 lbf.in (3.4 N.m) for LXM32.D30M2 10 A at 115 V single phase
Peak stall torque 78.76 lbf.in (8.9 N.m) for LXM32.D30M2 10 A at 115 V single phase
90.27 lbf.in (10.2 N.m) for LXM32.D18M2 6 A at 230 V single phase
Nominal output power 700 W for LXM32.D30M2 10 A at 115 V single phase
900 W for LXM32.D18M2 6 A at 230 V single phase
Nominal torque 24.78 lbf.in (2.8 N.m) for LXM32.D18M2 6 A at 230 V single phase
29.2 lbf.in (3.3 N.m) for LXM32.D30M2 10 A at 115 V single phase
Nominal speed 3000 rpm for LXM32.D18M2 6 A at 230 V single phase
2000 rpm for LXM32.D30M2 10 A at 115 V single phase
Product compatibility LXM32.D18M2 at 230 V single phase
LXM32.D30M2 at 115 V single phase
Shaft end Untapped
IP degree of protection IP54 (standard)
Speed feedback resolution 32768 points/turn x 4096 turns
Holding brake With
Mounting support International standard flange
Electrical connection Rotatable right-angled connectors