Kollmorgen MMC Smart servo Drive MMC-SD-16.0-460

PRODUCT DETILS 

MMC Smart Drives provide 0.5kW to 65kW continuous
output power in a compact package. Available in both
230 and 460VAC systems, they include an integral power
supply and plug-and-play cables for simple installation.
PicPro® software provides ladder logic, function block
and structured text languages for programming, along with
parameter views, a software oscilloscope and autotune to
simplify configuration, tuning and maintenance.

Features
Wide output range from 1.8 to 108 Amps RMS/phase, continuous
Separate control power and line power inputs enable diagnostics and feedback tracking even when line voltage is off
Wide line voltage range: 100 to 240 VAC 1-phase input (230 volt drive) or 200 to 480VAC 3-phase input (460 volt drive)
Available on-board digital MMC controller for control of up to 16 axes
Compatible with incremental encoder, resolver, sine encoder, EnDat 2.1 sine encoder, BiSS sine encoder, and Comcoder feedback
All setup and tuning parameters are saved in nonvolatile memory on the drive and can also be saved to disk
Velocity loop bandwidth up to 400 Hz
Advanced speed control algorithms for superior control
CE Marked; UL and cUL Listed
External active shunt available (230 volt drive) or external passive shunt available (460 volt drive)
Phase-to-phase and phase-to-ground short circuit protection


240/400/480 VAC Continuous Peak Current H W D
3 Phase Current (A RMS) (A RMS) (mm/inches) (mm/inches) (mm/inches)

12 30 256 / 10.08 99 / 3.90 185 / 7.28

Model Package Cont. Current (amps) Peak Current(amps) Dimensionsinches (mm) WxHxD
MMC-SD-0.5-230 Micro 2.5 7.5 3.69(94) x 10.13(257) x 6.12(156)
MMC-SD-1.0-230 Micro 5.0 15.0 4.69(119) x 10.13(257) x 6.12(156)
MMC-SD-2.0-230 Micro 10.0 30.0 4.69(119) x 10.13(257) x 6.12(156)
MMC-SD-1.3-460 Size 1 3.0 6.0 4.14(105) x 13.66(347) x 8.35(212)
MMC-SD-2.4-460 Size 1 5.5 11.0 4.14(105) x 13.66(347) x 8.35(212)
MMC-SD-4.0-460 Size 2 9.0 18.0 4.15(106) x 16.85(428) x 11.35(288)
MMC-SD-6.0-460 Size 2 13.5 27.0 4.15(106) x 16.85(428) x 11.35(288)
MMC-SD-8.0-460 Size 2 18.0 36.0 4.15(106) x 16.85(428) x 11.35(288)
MMC-SD-12.0-460 Size 3 27.5 55.0 6.1(155) x 21.65(550) x 11.36(288)
MMC-SD-16.0-460 Size 3 36.5 73.0 6.1(155) x 21.65(550) x 11.36(288)
MMC-SD-24.0-460 Size 3 55.0 110.0 6.1(155) x 21.65(550) x 11.36(288)
Assignable Digital Inputs 8, 24V DC optically isolated inputs
Assignable Digital Outputs 4, 24V DC optically isolated outputs, short circuit protected
Assignable Relay Output 1 Relay Output (typically used for brake control)
Analog Input 1 Analog Velocity or Torque command input
Feedback One (F1) Motor Feedback - incremental encoder, high resolution encoder, resolver (resolver interface option module required)
Feedback Two (F2) Secondary Feedback - incremental encoder
Drive Control Power 24V DC input for control power, independent of power section line voltage input