LAPP Servo Motor Cable 27960

PRODUCT DETILS 

Product features

Dynamic performance in power chains: Acceleration up to 50 m/s2. Travel speeds up to 5 m/s. Travel distances up to 100 m.
Low-capacitance design: this may result in lower EMI interference, depending on the drive’s electrical operating conditions.
Halogen-free materials
Flame retardancy: UL/CSA: VW-1, FT1 IEC/EN: 60332-1-2
Oil-resistant


Technical data
Core identification code
Power: black cores with marking U/L1/C/L+
V/L2
W/L3/D /L- and 1 green-yellow core
Optional designs with
one pair of control cores: black
white
Two pairs of control cores: black with white numbers: 5, 6, 7, 8

Approvals

VDE - Reg. - No. 8591
UL AWM Style 20234
CSA AWM I/II, A/B 1000 V 80° FT 1

Specific insulation resistance
> 20 GOhm x cm

Conductor stranding
Extra-fine wire according to VDE 0295, class 6/IEC 60228 class 6

Minimum bending radius
For flexible use:
7.5 x outer diameter (1.5-16 mm2)
10 x outer diameter (25-50 mm2)
Fixed installation: 4 x outer diameter

Nominal voltage
VDE: power cores and control cores: U0/U: 600/1000 V
UL & CSA: 1000 V

Test voltage
Core/Core: 4 kV
Core/Screen: 4 kV

Protective conductor
G = with GN-YE protective conductor

Temperature range
Flexing: -40°C to +80°C
Fixed installation: -50°C to +80°C