Baldor TSD DC Servo Drive TSD-050-05-2-U

PRODUCT DETILS 

The TSD from Baldor is a DC servo drive providing control
for DC servo motors. Operating directly from 115 VAC it
will provide up to 5 amps continuous (peak = 2x) and will
power servos requiring 50 or 100 volt bus. The TSD is a totally
enclosed, stand alone unit.

Features:

1 or 2 axis of servo control, up to 500 watts per axis
Direct 115 operation with models providing 50 v and 100 V bus
5 amp continuous; 10 amp peak per axis
Easily interfaces with today’s motion controllers
Standard +/- 10 Vdc input command
Simple easy front panel adjustments with LED status indicators
Fully protected unit - over/under voltage, over temperature, excess/surge current, short circuit protection, loss of logic voltage


Description Unit
Rated Bus Voltage (nominal) VDC 50
Continuous Current A 5
Peak Current A 10
Maximum Time Sec 2
Peak Current Adjustment A 0-10
Switching Frequency kHz 20
Form Factor 1.01
Minimum inductance mhy 1.0
Frequency Response kHz 2.5
Positive Logic 15 VDC mA 20
Negative Logic 15 VDC mA 20
Minimum Motor Inductance mhy 1.5
Differential Input ±VDC 5 to 15
Impedance k Ω 20
Operating Temp °C 0-50
Drift µV/°C 10
Weight lbs. 19